Since ancient times, people have paid attention not only to the value of gifts, but also to its packaging. After all, packaging is a gift impression we see first. Secondly, it plays an important role in protecting gifts. In modern society, people pay more attention to the packaging of gifts, so the use of gift boxes is more extensive. The following mainly introduces the common problems in the mounting process of gift boxes.

1、礼品包装盒出现翘角现象。

1. Warping of gift box.

出现这种情况的主要原因是贴的张数太多，而导致纸板边沿的胶已干而不能粘住。所以通常应在贴二十张就压榨较为合适。

The main reason for this is that too many sheets are pasted, resulting in the glue on the edge of the paperboard has dried and can not stick. Therefore, it is usually more appropriate to press after pasting 20 sheets.

2、礼品包装盒纸的湿度太大，特别是针对金卡的平贴。

2. The humidity of gift box paper is too high, especially for the flat sticker of gold card.

主要是由于金卡纸对水份的渗透和散失能力很差，而普通的平贴胶其含水量本身较高。所以通常用快干胶或将产品展开置于阳光下晾晒来解决。

This is mainly due to the poor water penetration and loss ability of gold card paper, while the water content of ordinary flat adhesive is high. Therefore, it is usually solved by using quick drying glue or unfolding the product and drying it in the sun.

3、所裱瓦或平贴的礼品盒盒，假如在空气湿度较大的环境下，放置时间稍长会出现变黄等现象。主要是由于部分厂家采用了含碱性很大的水玻璃胶或淀粉胶所致。所以为了保证礼品包装盒的质量我们应该选用质量较好的平贴和瓦楞胶。

3. The tile mounted or flat pasted gift box will turn yellow if it is placed for a long time in an environment with high air humidity. This is mainly due to the use of sodium silicate adhesive or starch adhesive with great alkalinity by some manufacturers. Therefore, in order to ensure the quality of gift boxes, we should choose high-quality flat stickers and corrugated glue.

4、礼品包装盒出现脱层现象，主要由于粘接剂的强度不够所致，建议选用一些正规厂家的产品，这样既能保证强度，减少湿度，增加挺度，又能进步礼品包装盒产品质量和档次。

4. The delamination of the gift box is mainly due to the insufficient strength of the adhesive. It is recommended to select the products of some regular manufacturers, which can not only ensure the strength, reduce the humidity, increase the stiffness, but also improve the product quality and grade of the gift box.

以上就是礼品包装盒裱工艺会出现的四种常见问题，对于产品加工质量的影响都很大，需要在制作时多加注意。通常一些产品在加工过程中会使用到的工艺有很多，所以出现的问题也挺多，还需要我们多多了解，才能进一步提高它们的制作质量。

The above are the four common problems in the mounting process of gift packaging box, which have a great impact on the product processing quality. We need to pay more attention to it when making. Usually, many processes are used in the processing of some products, so there are many problems. We still need to know more about them in order to further improve their production quality.